User Manual Part 1

MARS-1030F User Manual 24
2.4 Handling the PDT
2.4.1 Starting the PDT
Press the power key to turn on/off the PDT. If the PDT does not power on,
perform a cold boot. See “Resetting the PDT” on page 50.
Figure 2.10: Starting the PDT
CAUTION: When a battery is inserted into the PDT for the first
time, upon the PDT’s first power up, the device boots and powers on
automatically.
When the PDT is powered
on for the first time, it ini-
tializes its system. A splash
screen appears for a short
period of time followed by
the Win CE .NET 4.2 win-
dow.