User Manual Part 1

MARS-1030F User Manual 22
2.3.3 Charging the battery pack with a Single Dock
a) Leave the battery pack inside the PDT
1. Connect the power cord to the power adapter.
2. Connect the power cord to a power source.
3. Plug in the connector of the power adapter into the Single Dock.
4. Insert the PDT into the Single Dock.
Figure 2.9: Charging with a Single Dock
When charging the battery pack, the charge indicator on the PDT turns
Red. After the battery pack is fully charged, the indicator turns Green.
CAUTION: Single Cradle Adapter supplies 5 V DC / 6.5 A. This is
different from the PDT Adapter (5 V DC / 2.6 A). Please use the
Single Cradle Adapter only.