User Manual Part 1

MARS-1030F User Manual 16
Table 2.1: Description of PDT General View
1 Scanner LED Indicator
“Red” color Reading barcode
“Green” color Successful reading
2 Charge LED Indicator
“Red” color Charging battery
“Green” color Battery charged full
3 LCM / Touch Panel
Do specific actions with touch panel and
stylus
4
Left Scan key
Right Scan key
Scan key
Start scanning the barcode by pressing any
one of these three scan keys
5 Power key
Puts the terminal into and wakes the termi-
nal from suspend mode.
6F1 ~ F4 key
Four application program keys and hot keys
as defined by the end user.
7 Navigation key
Navigation keys for left, right, up and down
directions
8 Numeric keys Numeric keys
9 Alphabetic key Alphabetic keys
10 Fn key
This key is used in combination with other
keys to type special characters and perform
system functions.
11 Enter key This key confirms data entry
12
Earphone Jack Con-
nector
A connector to plug a earphone
13
USB / Serial / Synchro-
nization port
A connector to support USB Host/Client
and serial functions
14 Scan window A window for scanning of barcode reader
15 Stylus
Use the stylus for selecting items and enter-
ing information.
16 Battery Cover
Protects the battery pack and keeps the
battery switch covered to keep the system
in suspend mode
17 Battery Cover Latch To keep the Battery Cover locked
18 Hand-strap This strap can be sealed tighter or looser
19 Speaker 1.5 W speaker for audio sound
20 DC Power Jack A connector to support AC power.
21 End Cap
Protects the CF and SD slots from dust and
water