User Manual

91 Chapter 3
3.2.6 Date/Time
3.2.7 Dialing Properties
Table 3.24: Date/Time
ICON ITEM & FUNCTION
• “Date/Time” Tab :( Figure 2-14)
* Please see the detail information of 2.5.1 Setting Time
and Date on P.2-21
Table 3.25: Dialing properties
ICON ITEM & FUNCTION
• “Dialing Properties” Tab :( Figure 3-44)
* In the When dialing from list, select the “Location”
where you want to change settings.(Figure 3-45)
* To create a new location, select “New”. Enter the name
of the location, and then select “OK”.(Figure 3-46)
* Enter or edit the area code and local country code as
needed.
*In Dial using, select “Tone dialing” or “Pulse dialing”.
Most phone lines are tone.
* To automatically disable call waiting, select “ Disable
call waiting by dialing”, select the appropriate number
sequence in the list, or enter a new sequence.
• Editing dialing patterns (Figure 3-47)
* Using the codes listed in the topic; revise the dialing
patterns as needed.
Notes:
- If you need to use character other than the ones
listed here, use manual dialing.
- Hyphens and spaces in dialing strings are ignored.
- Some modems may not respond to the following
characters, even though your device lets you add
them to the dial string.