User Manual

55 Chapter 3
Table 3.1: Basic Explaining
Field Name Function Explaining
Beep After Scan OK
Select the numbers of beep tone after scan OK.
None
After scanning the barcode, do
not give out beep sound.
One Time
After scanning the barcode,
give out beep one time.
Two Times
After scanning the barcode,
give out beep two times.
Scan Timeout (sec)
Select the scanning timeout duration
(in seconds) from this pull-down list. <2 ~ 20
sec, Default: 5>
Termination Code
None
After showing barcode, do not
action.
CRLF
After showing the barcode,
jump to next row.
Space
After showing the barcode,
jump one unit.
Tab
After showing the barcode,
jump a section.
Continuous Scan
Disable Disable this functionality.
1 ~5 sec
Alternate second number of
Continuous Scan.
Keybd Message
Select a method based upon the barcode
scanning application you will use.
Type Writing
A unit continues a unit, fast
showing barcode number.
Copy & Paste Once show barcode number
Prefix Type the desired label prefix in this text box
Suffix Type the desired label suffix in this text box
Default
Press “Default” button to reset all configuration
setting of “Basic” Tab into default values.
F/W ver. Decoder firmware version.
Set All To Default
Press “Set All To Default” button to reset all
configuration setting of “Basic” Tab, “Code
Configure” Tab, “Code ID” Tab and all barcode
of “BarCode Setup” into default values.