User Manual

41 Chapter 2
2.5 Navigating the Display
2.5.1 Setting Time and Date
In the Date/Time options, you can change the year, month, date, time,
time zone, or select automatic adjust for Daylight Saving Time. To set or
change the date and time:
Figure 2.14: Date/Time properties
1. Select Start > Settings > Control Panel > Date/Time
2. To change the year, select the year or open a numeric dial. Select
the up arrow to increase the value; select the down arrow to
decrease the value. Or you can type a new value in the field.
3. Select the month to open a
pull-down list of months or press the arrow buttons to either side of
the month to increase or decrease the month.
4. To change the time, select the hour, minute, seconds, or AM/PM
and select the up arrow to increase the value; select /tape the down
arrow to decrease the value. Or you can type a new value in the
field.
5. Select your correct time zone from the pull-down list.
6. To automatically adjust the clock for Daylight Saving Time, enable
the checkbox at the bottom of the screen.
7. Select Apply to make save your changes [and make additional
modifications] or select OK to exit the Date/Time settings.