User Manual

MARS-1030 User Manual 24
2.4 Handling the PDT
2.4.1 Starting the PDT
Press the Power key to turn on/off the PDT. If the PDT does not power
on, perform a cold boot. See 2-7 Resetting on page 2-27.
Figure 2.10: Starting the PDT
CAUTION: When a battery is fully inserted in PDT for the first
time, upon the PDT’s first power up, the device boots and
powers on automatically.
When the PDT is powered
on for the first time, it
initializes its system. A
splash screen (figure 2-10)
appears for a short period
of time followed by the
Wince.NET 4.2 window.