User Manual

MARS-1030 User Manual 16
Table 2.1: Description of PDT General View
1 Scanner LED Indicator
“Red” color Reading barcode
“Green” color Successful reading
2 Charge LED Indicator
“Red” color Charging battery
“Green” color Battery charged full
3 LCM / Touch Panel
Do specific action through touch panel by
stylus
4
Left Scan key
Right Scan key
Scan key
Start scanning the barcode by pressing any
one of these three scan keys
5 Power key
Puts the terminal into and wakes the
terminal from suspend mode.
6F1 ~ F4 key
The four application keys, hot keys of
application program defined by end user.
7 Navigation key
Navigation keys for left, right, up and down
directions
8 Alpha-Numeric keys
Numeric keys, Change to Alpha keys after
pressing Alpha key.
9 Alpha key Toggle Alpha-mode for Alpha-Numeric keys
10 Fn key
This key is used in combination with other
keys to type special characters and perform
system functions.
11 Enter key This key confirms data entry
12
Earphone Jack Con-
nector
A connector to plug a earphone
13
USB / Serial / Synchro-
nization port
A connector to support USB Host/Client
and serial functions
14 Scan window A window for scanning of barcode reader
15 Stylus
Use the stylus for selecting items and
entering information.
16 Battery Cover
Protect Battery pack, keep the switch of
battery cover to leave system from suspend
mode
17 Battery cover Latch To keep Battery Cover locked
18 Hand Strap This strap can be sealed tighter or looser
19 Speaker 1.5W speaker for audio sound
20 DC Power Jack A connector to support AC power.
21 End Cap
Protect CF slot and SD slot from dust and
water