User Manual

Table Of Contents

MARS-1030 User Manual 180

Example: You need to read any combination of eight digits, or a combi-

nation of four digits, two uppercase letters, and two digits. The template

would be:

To create this template, you would enable the OCR-A font. Scan the

Enter OCR Template symbol. Scan the d from the OCR Programming

Chart in the back of this manual eight times, then scan the t to create the

“or” statement. Then you would scan the characters for the second tem-

plate. Scan d four times, scan l two times, then scan d two more times.

Scan Save OCR Template. This would let you read either type of for-

mat, for example:

You can string together as many templates as you need.

OCR Template Codes

Note: Reading more than three rows of OCR is not recommended.

Contact the factory if you have an application that requires reading four

or more rows of OCR.

† One or more two-digit numbers and Save are required after reading this

programming symbol. Refer to the Programming Chart on the inside the

back cover of this manual.