User Manual

MARS-1030 User Manual 114
3.2.21 System
Table 3.39: System
ICON ITEM & FUNCTION
• “General” Tab : (Figure 3-90)
* To show:
- Firmware information
- Information about Processor type, Memory size,
Expansion card
• “Memory”: (Figure 3-91)
* Move the slider to adjust memory allocation. Default
storage memory is normally is normally set to about
8MB with the reminder assigned to Program memory.
* Press the “OK” key on the Keypad.
Note: the difference is occupied by OS between the RAM
size in Information properties and total memory size of
storage memory and program memory
• “Device Name” Tab : (Figure 3-92)
* Your device uses this information to identify itself to
other computers.
* The input panel will open to facilitate data entry.
* To close the Device Name, press the “OK” button, or
press the <Enter> key on keypad.
• “Copyrights” Tab: (Figure3-93)
* Refer to this tab for specific copyright data. As a user,
you are responsible to read this statement.