User Manual

107 Chapter 3
3.2.16 Power
Table 3.34: Power
ICON ITEM & FUNCTION
• “Battery” Tab : (Figure 3-79)
* Provide change level indicators for Main battery and
Backup battery.
* Provide remaining power capacity of main battery.
* If a “Main Batteries very Low” warning message shows,
the remaining battery life is around 30 minutes to
MARS-1030 shuts down. ( Figure 3-83)
* The PDT will shutdown during the main batteries
capacity is around 0%
* To exit Battery control panel, press “OK” from the
command bar, or press <Enter> key on keypad.
• “ Schemes” Tab: (Figure 3-80)
* The Scheme Tab allows you to determine the time to
switch state to Suspend mode when using either
Battery Power or AC Power.
*Select Battery Power or AC Power as the power
scheme from the pull-down list.( Figure 3-80)
* Select the time to suspend mode from the pull-down
list. ( Figure 3-81)
• “Device Status” Tab: ( Figure 3-82)
Provide power level of device – The power level ranges
from “ High(D0)” which means the device is at the highest
power level to “Off(D4)” which means the device is at the
lowest power level.
Note:
This ICON inside the Task Bar shows that AC adapter
provides power to the PDT.
The ICON inside the Task Bar shows that Main Batteries
provides the power to the PDT.
The ICON inside the Task Bar shows that AC adapter
provides the power to the PDT and is charging the main
batteries.