User Manual

99 Chapter 3
3.2.12 Network and Dial-up Connections
Table 3.30: Network and Dial-up Connections
ICON ITEM & FUNCTION
• “Connection” Tab :
* To create a “Dial-up Connection”:
- Double-tap the “Make New connection”.
- In the “Make New Connection” dialog box, enter a
name for the connection.
-Select “Dial-Up Connection”.
- Select the “Next” button.
- Select the modem you want use.
-Select “Configure”
- Under “Connection Reference”, use the default
settings provided. If you can’t connect using these
settings, see your ISP or network administrator for
specific information. If you want to always enter a
phone number before connecting, Select “Manual
Dial”. Select “OK”.
-Select “TCP/IP Settings”. In the “General” tab,
ensure “Use Server-assigned IP address” is
selected. In the “Name Servers” tab, ensure “Use
Server-assigned addresses” is selected, and select
“OK”. If you are unable to connect with these default
settings, see your ISP or network administrator for
specific TCP/IP information.
- Select the “Next” button and type the telephone num-
ber.
- Select the “Finish” button.
The connection you just created appears as an icon in the
“Network and Dial-up Connections” folder.
- Set up a point-to-Point Protocol(PPP) account with
an ISP and obtain the following information:
> Access telephone number
> User name
> Password