User manual

IPPC-8151S User Manual 8
Chapter 2 System Setup
2.1 Enclosure Kit
With IPPC-8151S enclosure kit (P/N: IPPC-8151S-EMKE), IPPC-8151S
can provide all-around IP66 waterproof and dustproof protection. Please
follow the instruction below to make sure IP66 protection.
1. Put IPPC-8151S into the enclosure kit
2. Use the fixture to make sure IPPC-8151S is closed tightly with the
enclosure kit. Please also use the pad to avoid the scratch on sur-
face while screwing. The surface of the front panel and the enclo-
sure kit should be in the horizon line.
Note: The fixture can be bought from a hardware store.
3. Use the screws from IPPC-8151S-EMKE accessory kit. The Tor-
pque value is required minimum 10Kgf.
4. Repeat action 1, 2 and 3 until the four sides of the enclosures kit are
closed tightly with screws.