User`s manual
Table Of Contents
- Table of Contents
- Chapter 1 General Information
- 1.1 Introduction
- 1.2 Specifications
- 1.3 Dimensions
- Figure 1-1: IPC-610 dimensions
- Chapter 2 System Setup
- 2.1 Removing the Cover
- Figure 2-1: Removing the cover
- Figure 2-2: Inserting/removing the drive bay
- Figure 2-3: Inserting the drives into the drive bay
- 2.3 The Hold-down Clamp
- 2.4 Connecting the Keyboard
- Figure 2-4: Detaching the hold-down clamp
- Figure 2-6: Front keyboard connection
- Figure 2-7: Rear keyboard connection
- 2.5 Replacing the Filter
- Figure 2-8: Replacing the filter
- Appendix A Rear Cover and Window
- A.1 Changing the Rear Cover According to Power Supply Used
- Figure A-1: IPC-610 with PS/2 size power supply
- Figure A-2: IPC-610 with redundant power supply
- A.2 Changing the Rear Window of the Backplane
- Figure A-3: Rear window of IPC-610 for standard 14-slot backplane, with PS/2 size power supply
- Appendix B Exploded Diagrams
- Figure B-1: IPC-610 exploded diagram (internal components)
- Figure B-2: IPC-610 exploded diagram (case components)
- Appendix C Safety Instructions
- C.1 English
- C.2 German - Wichtige Sicherheishinweise
2
IPC-610 User's Manual
Environmental Specifications
• Operating temperature: 0 ~ 50° C (32 ~ 122° F)
• Relative humidity: 10 ~ 95% @ 40° C, non-condensing
• Vibration (operating): 5 ~ 17 Hz, 0.1" double amplitude displacement; 17 ~ 500 Hz, 1.5 g
acceleration peak to peak
• Shock (operating): 10 g acceleration peak (11 ms duration)
• Safety: C-UL approved
• EMI: Meets FCC/VDE Class A
• CE compliant
1.3 Dimensions
Figure 1-1: IPC-610 dimensions
Unit = mm