User manual

13 Chapter 3
3.2 Touchscreen Calibration
You can calibrate the touchscreen through “Start” ‡ “Setting” ‡ “Control
Panel” ‡ “Stylus” as shown in the Figure below.
Figure 3.3: Style
The window of the stylus properties will display after you click the stylus.
There are two tabs in this screen: Double-Tap and Calibration. Double-
Tap is used to record the time period between the two taps when double-
tapping in Windows CE. Calibration is for users to calibrate the touch
screen.
Figure 3.4: Stylus Properties
Please press “Calibration” and then click “Recalibrate” to calibrate the
touch screen as shown below. A cross will appear on the screen in the
order: center point, upper-left, lower-left, lower-right, and upper-right.
Use the stylus to tap the center of the cross until the cross moves to next
location.