User`s manual

43 Chapter 5
5.1.4 Dual/Simultaneous Display
The PCM-9587 uses a Intel Montara-GM/GM+ GMCH Chrontel 7017
controller that is capable of providing simultaneous dual view display of
the same content on a flat panel and CRT.
To set up dual view (simultaneous mode) under Windows NT/2000/XP,
follow these steps:
Step 1. Open the Control panel, and select “Display”.
Step 2. Select “Settings”.
Step 3. Select "Advanced", "Graphic Properties."
Step 4. Select "Devices" mode and click "OK".
1