User`s manual

3 Chapter 1
1.3 Specifications
Standard SBC Functions
• CPU: Supports onboard Celeron® M
• BIOS: Award 512K byte Flash memory
• System memory: One 184 pin DIMM sockets, support ECC
Double Data Rate (DDR)128 MB to 1 GB, accepts 128/256/512/1000
MB DDR200/266 DRAM.
• System chipset:Intel 852GM GMCH/6300ESB Chipset 400MHz FSB
• Enhanced IDE interface: One Enhanced IDE interface supports 2 IDE
devices. PIO mode 3 or mode 4, Ultra DMA 100 transfer. 2 Serial
ATA standard connector to support SATA 150
• FDD interface: Supports one FDD
• Serial ports: Three serial RS-232 ports, one serial RS-232/422/485
ports
• Parallel port: One parallel port, supports SPP/EPP/ECP mode
• Keyboard/mouse connector: Supports standard PS/2 keyboard and a
PS/2 mouse
• Power management: APM Rev. 1.2 compliant power management
ACPI support
• Watchdog timer: Winbond W83627, 255 levels timer interval, setup
by software
• USB: Four USB 2.0 compliant host ports
• IrDA: N/A
• GPIO: 8-bit general purpose input/output
• Expansion: PC/104(LPC), PC/104+, PCI and miniPCI
Solid State Disk
• Supports one 50-pin socket for CFC type I/II
VGA/LCD Interface
• Chipset: Intel Montara-GM/GM+ GMCH
• Frame buffer: Optimized Shared Memory Architecture, supports up to
64MB frame buffer using system memory