User manual

EKI-6331AN_User Manual Page 13
Chapter 3 Basic Settings
Factory Default Settings
The following table shows EKI-6331AN factory default settings. You can re-acquire these parameters
by default. If necessary, please refer to the “Restore Factory Default Settings”.
Table 1 Factory Default Settings
Features Factory Default Settings
Username admin
Password password
Wireless Device Name apXXXXXX (X represents the last 6
digits of Ethernet MAC address)
Operating Mode AP
Data Rate Auto
LAN
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
Gateway 0.0.0.0
Primary DNS Server 0.0.0.0
Secondary DNS Server 0.0.0.0
Spanning Tree Enable
802.11 Mode 802.11a/n
Country/Region United States
Channel Number 149
SSID Wireless
Broadcast SSID Enable
HT Protect Disable
Data Rate Auto
Output Power Full
Channel Mode 20MHz
WMM Enabled
RTS Threshold (byte) 2346
Fragmentation Length (byte) 2346
Beacon Interval 100
DTIM Interval 1
Space in Meter 0
Flow Control by AP Disable
Security Open System