Firmware 6.3.
FW 6.3.1 RELEASE NOTES Abstract This document describes: • Firmware update instructions. • Description of all new features, fixes and other changes implemented in the firmware. • Known issues related to a firmware version. Firmware Details • Firmware version: 6.3.1 • Release date: July 21, 2021 • Hardware compatibility: applicable to the Advantech routers Please note that not all new Advantech routers are produced and shipped with the latest release of the firmware.
FW 6.3.
FW 6.3.1 RELEASE NOTES General Update Instructions and Notices HTTPS certificates: The HTTPS certificate format in the router was updated in FW 5.3.5 to improve the security. Existing HTTPS certificates on previously manufactured routers will not automatically be updated with the firmware update! It is possible to update the HTTPS certificates by deleting the files within /etc/certs/https* in the router (e.g. via SSH). The certificates will be re-created automatically during the router’s next start.
FW 6.3.1 RELEASE NOTES Updating Firmware of Version Less than 5.3.0 It is necessary to follow specific update instructions below only if you are updating from firmware older than 5.3.0. Due to a bug in the firewall (now fixed) when a WAN device is part of a bridged interface, caution should be taken when updating in following case: Condition: When a WAN device is part of a bridged interface, access to that WAN device (HTTPS, SSH) is always granted regardless of configuration.
FW 6.3.
FW 6.3.
FW 6.3.
FW 6.3.
FW 6.3.
FW 6.3.
FW 6.3.
FW 6.3.1 RELEASE NOTES Firmware Update – Unexpected Filename If the filename of firmware for your router was changed, you could have an issue during manual firmware updating or with Automatic Update feature. This warning message will appear: "You are trying to upload file "xx.bin" but "yy.bin" is expected. Are you sure to continue?" To fix this issue follow instructions in Part I - Firmware Update Instructions. Automatic Update – Update to Version 6.1.
FW 6.3.1 RELEASE NOTES SmartStart SL302 – Cellular Network Authentication It is not possible to use username and password when connecting to Mobile WAN network (on Mobile WAN Configuration page) if your SmartStart SL302 router has the 20.00.522 firmware version inside the Telit LE910-NA1 cellular module. The version of cellular module firmware can be found at Mobile WAN Status page in Mobile Network Information section.
