User manual

35 APAX-5000 I/O User Manual
Chapter 2 Analog Input
/
Output Modules
Note! You can use the jumpers to configure each analog input channel type
(voltage/thermocouple or current). Refer to Section 1.5 for the location
of the jumpers. There are a total of 12 jumpers and each is specific for
one channel. Refer to figure below for how to configure analog input
channel type. In this example, channels 1, 2, 7, 8 and 9 are set as cur-
rent input channels, while other are set as voltage input channels.