User manual

33 APAX-5000 I/O User Manual
Chapter 2 Analog Input
/
Output Modules
APAX-5017H Specifications
 Channels: 12
 Input Impedance: 2MΩ (Voltage), 120 Ω (Current)
 Input Type: V, mV, mA
 Input Range: 0 ~ 500 mV, ±10 V, 0 ~ 10 V, 0 ~ 20 mA, 4 ~ 20 mA
 Configure Different Range for Each Channel: Yes
 Accuracy: ±0.1% or better (voltage), ±0.2% or better (current) at 25° C
 Resolution: 12-bit
 Sampling Rate: 1,000 sample/second (per channel)
 Span Drift: ±25 ppm/° C
 Zero Drift: ±6 μV/° C
 Input Characteristic Curve: According to IEC 61131-2
Protection
 Over Voltage Protection: ±35 VDC
 Isolation: 2,500 VDC (Between channels and backplane bus)
Environment
 Operating Temperature: -10 ~ 60° C (when mounted vertically)
 Storage Temperature: -40 ~ 70° C
 Relative Humidity: 5 ~ 95% (non-condensing)
General
 Dimensions (W x H x D): 30 x 139 x 100 mm
 Weight: 175 g
 Power Consumption: 3.5 W @ 24 VDC (typical)
Note! The voltage between any two pins must not exceed 15 V