User manual

29 APAX-5000 I/O User Manual
Chapter 2 Analog Input
/
Output Modules
Note! To keep measurement accuracy please short the channels that
are not in use.
Note! You can use the jumpers to configure each analog input channel type
(voltage or current). Refer to Section 1.5 for the location of the jumpers.
There are a total of 12 jumpers and each is specific for one channel.
Refer to figure below for how to configure analog input channel type. In
this example, channels 1, 2, 7, 8 and 9 are setting as current input chan-
nels, while other channels are setting as voltage input channels.