User manual

APAX-5000 I/O Series User Manual 18
2. Attach the APAX-5002 backplane on the DIN rail.
3. Repeat Step 1 ~ Step 2 until necessary APAX-5002 backplanes are all attached
on the DIN rail.
4. Move all backplanes to stack them together. Then slide the backplane locks on
the backplanes to fasten all backplanes. (Similar to Step 6 and 7 in section
1.7.1)
5. Slide the DIN rail lock of all backplanes into the position, to fix all backplanes to
the DIN rail.
6. Insert all necessary APAX-5000 I/O modules to the backplanes. (Similar to Step
2, Step 4 and Step 8 in section 1.7.1)
7. Slide the module lock of those APAX-5000 I/O modules into the position, to fix
these modules to related backplanes. (Similar to Step 3, Step 5 and Step 9 in
section 1.7.1)
Note! When the total number of APAX-5520 and APAX-5000 I/O modules is
odd, you can use APAX-5001 (1-slot backplane) as the last backplane in
the system. And the procedure to attach APAX-5001 on the DIN rail is
similar as APAX-5002.