User manual
13 APAX-5000 I/O Series User Manual
Chapter 1 Overview
1.7.2 Using the APAX-5343E Power Supply Module
APAX-5000 I/O modules can also be powered by the APAX-5343E power supply
module, connected to the left side of the whole system. The power can be transferred
to APAX-5000 I/O modules though the backplanes.
1. Follow the procedure described in Section 1.7.1 to assembly APAX-5000 I/O
modules into one complete system. The only difference is that you don't need to
connect the power supply wiring to the power connectors on the backplane
(step 1 in Section 1.7.1).
2. Pull up the module locks on the upper case of one APAX-5343E. Then you can
separate the upper case of APAX-5343E from its backplane.
Note! Refer to APAX-5520 Hardware Manual for APAX-5343E specification.