User manual

APAX-5000 I/O Series User Manual 8
You can distinguish if the ID number is doubled by the front LED. When the LED color
is green, only 0 ~ 15 ID number is used (0 ~ 15 according to the rotary ID switch).
Once the LED color is orange, the ID number is doubled (16~31 according to the
rotary ID switch). Refer to figure below for its location and how to configure it.
DIP Switch Setting ID LED Color
16 ~ 31 according to the rotary ID swich Orange
0 ~ 15 according to the rotary ID swich Green
Warning! Avoid two modules with the same ID number in the same system, or you
cannot see the module in the software utility. The LED on the front side
will flash four times if two or more modules have the same ID number in
one system. If this happens, simply change the ID number for these
conflicted modules and all of them can be found in utility again.