User manual
www.advantech.com/products
Online Download
20-13
19
PC-based Controllers
Embedded Controllers
20
PAC
21
Motion Control
22
RS-485 I/O
23
Ethernet I/O
24
Building Automation
25
Self-service Terminals
26
eHome Platforms
27
Features
APAX-5620CE
Onboard XScale
®
PXA270 520 MHz processor
64 MB SDRAM on board, 32 MB Flash
Expands I/O by connecting with APAX-5000 I/O modules
Windows CE .NET ready platform
1 x VGA port for display and 1 x USB port
1 x CompactFlash slot for data logging
2 x 10/100 Mbps LAN, 2 x RS-485 and 2 x CANopen interface
Provides C/C++ and .NET class libraries for I/O control and communication
Acts as CANopen master to integrate other CANopen devices
Introduction
APAX-5620CE is a very compact and cost effective controller with XScale PXA270 CPU. The built-in Windows CE operating system makes APAX-5620CE a ready application platform
to shorten development time. Connecting with other APAX-5000 I/O modules, APAX-5620CE can become a standalone control system. By C/C++ and .NET libraries for the I/O
modules, developers can build their applications under the Windows development environment in a short amount of time. With its built-in CAN interface, APAX-5620KW can perform
as CANopen master to connect with other CANopen devices like motors to deliver a complete I/O and motion system.
Specifications
System Hardware
CPU XScale PXA270 520 MHz
Memory Flash 32M bytes, SDRAM 64M bytes
Battery Backup Memory 256 KB file system, 256 KB direct access
Real-time Clock Yes
Watchdog Timer Yes
VGA DB15 connector
USB Ports 1 x USB 1.1
Storage 1 x Type II CompactFlash card slot (internal)
Connected I/O Modules 32 (max.)*
Digital Signals 2048 (max.)
Analog Signals 512 (max.)
Communication (Ethernet)
LAN Ports 2 x RJ-45 Port, 10/100 Mbps
Offer Modbus/TCP Server and Client API for programmer
Communication (Serial)
Medium 2 x Isolated RS-485 (2-wire)
Maximum Nodes 32 (in RS-485 daisy-chain network)
Offer Modbus/TCP Server and Client API for programmer
Isolation Protection 2500 V
DC
Software
Operating System Windows CE .NET
Control Software C/C++ and .NET library with utility
Communication (CANopen)
Medium 2 x Isolated CANopen
Protocol CANopen (CiA DSP341)
Speed 10, 20, 50, 125, 250, 500, 800, 1000 kbit/s
Isolation Protection 2500 V
DC
General
Certifications CE, FCC class A
Dimensions (W x H x D) 30 x 139 x 100 mm
Enclosure ABS+PC
Weight 210 g
Power Consumption 4.5 W @ 24 V
DC
(typical)
Environment
Operating Temperature -10 ~ 55 ° C (when mounted vertically)
Storage Temperature -40 ~ 70° C
Relative Humidity 5 ~ 95% (non-condensing)
Shock Protection 20 G @ wall mount, half sine, 11 ms
(Confirms to IEC 60068-2-27)
Vibration Protection 1 Grms @ 5 ~ 500 Hz (Random, operating, 1 hr/axis)
2 G @ 5 ~ 500 Hz (Sine, non-operating, 1 hr/axis)
(Confirms to IEC 60068-2-64 and IEC 60068-2-6)
Ordering Information
APAX-5620CE PC-based Controller with XScale CPU, CANopen
APAX-5002 2-slot Backplane Module
APAX-5343E Power Supply for APAX Expansion Module
PC-based Controller with
XScale
®
CPU and CAN
NEW
5R+6
COMPLIANT
*: APAX DI/O modules can use ID number 0 ~ 31, while AI/O modules and counter modules can only use ID numbers 0 ~ 15