User manual

20-10
PC-based Controllers & I/O Modules
APAX I/O Module
Selection Guide
Module Name APAX-5013 APAX-5017 APAX-5017H APAX-5018 APAX-5028
Description
8-ch RTD Module 12-ch AI Module
12-ch High Speed AI
Module
12-ch Thermocouple
Module
8-ch AO Module
Analog
Input
AI Channels
8 121212 -
Input Type*
RTD (2-wire or 3-wire) V, mV, mA V, mV, mA
V, mV, mA,
Thermocouple
-
Sampling Rate
(Samples/second)
10 (Total**) 12 (Total**) 1000 (per channel) 12 (Total**) -
Input Resolution
16-bit 16-bit 12-bit 16-bit -
Voltage Input
-
±150 mV, ±500 mV,
±1 V, ±5 V, ±10 V
0 ~ 500 mV
±10 V, 0 ~ 10 V
±50 mV, ±100 mV,
±500 mV, ±1 V, ±2.5 V
-
Current Input
-
±20 mA,
0 ~ 20 mA, 4 ~ 20 mA
0 ~ 20 mA, 4 ~ 20 mA
±20 mA,
0 ~ 20 mA, 4 ~ 20 mA
-
Direct Sensor Input
R T D
(Pt-100, Pt-200, Pt-500,
Pt-1000, Balo, Ni 518)
--
Thermocouple
(Type J, K, T, E, R, S, B)
-
Wire Burnout
Detection
All RTD range 4 ~ 20 mA 4 ~ 20 mA
4 ~ 20 mA and all
Thermocouple range
-
Analog
Output
AO Channels
----8
Output Type*
----V, mA
Output Resolution
- - - - 14-bit
Output Slew Rate
----
0.7 VDC/μs
(per channel)
Voltage Output
----
±2.5 V, ±5 V, ±10 V,
0 ~ 2.5 mV, 0 ~ 5 V,
0 ~ 10 V
Current Output
----0 ~ 20 mA, 4 ~ 20 mA
Short Circuit
Protection
----Yes
Fail Safe Value
----Yes
General
Weight
170 g 170 g 175 g 170 g 175 g
Operating
Temperatrure
-10 ~ 60° C (when mounted vertically)
Storage
Temperature
-40 ~ 70° C
Relative Humidity
(non-condensing)
5 ~ 95%
Power
Consumption
(typical)
2.5 W @ 24 V
DC
4 W @ 24 V
DC
3.5 W @ 24 V
DC
3.5 W @ 24 V
DC
3.5 W @ 24 V
DC
Isolation between
channels and
backplane
2500 V
DC
Power Supply
Module (optional)
APAX-5343E
Page
20-19 20-19 20-20 20-19 20-20
*: Each cahnnel can be configured with different type and range
**: Sampling rate value depends on used channel number.
Example: Using 6 channels on APAX-5017, sampling rate for each used channel will be 12/6 = 2 samples/second.