User manual

ManualsBrandsAdvantech ManualsComputer equipmentI/O Module 5000 Series



PC-based Controllers

& I/O Modules

APAX-5000 Series

APAX Series Overview

20-2

APAX System Architecture

20-4

Software Tools for PC-based Solutions

20-5

SoftLogic and HMI Software

20-6

APAX Controller Selection Guide

20-8

APAX Communication and Motion Module Selection Guide

20-9

APAX I/O Module Selection Guide

20-10

APAX-5520CE

PC-based Controller with XScale CPU

20-12

APAX-5620CE

PC-based Controller with XScale CPU and CAN

20-13

APAX-5570XPE

APAX-5571XPE

PC-based Controller with Celeron M CPU

20-14

APAX-6571XPE

PC-based Controller with Intel Atom CPU

20-16

APAX-5070

APAX-5071

APAX-5072

Modbus/TCP Communication Coupler

Profinet Communication Coupler

Ethernet/IP Communication Coupler

20-17

APAX-5202P

APAX-5090P

APAX-5095P

2-port AMONet Master Module

4-port RS-232/422/485 Communication Module

2-port CANopen Communication Module

20-18

APAX-5013

APAX-5017

APAX-5018

8-ch RTD Module

12-ch Analog Input Module

12-ch Thermocouple Input Module

20-19

APAX-5017H

APAX-5028

12-ch High Speed Analog Input Module

8-ch Analog Output Module

20-20

APAX-5040

APAX-5045

24-ch Digital Input Module

24-ch Digital Input/Output Module

20-21

APAX-5046

APAX-5060

APAX-5080

24-ch Digital Output Module

12-ch Relay Output Module

4/8-ch High Speed Counter Module

20-22

APAX-5343

APAX-5343E

APAX-5001/5002

Power Supply for APAX-5570 Series

Power Supply for APAX Expansion Modules

1-slot/2-slot Backplane Module

20-23

ADAM-5000 Series

Distributed I/O Systems & PC-based Controllers

20-24

ADAM-5000 Controller Selection Guide

20-26

ADAM-5000 I/O Module Selection Guide

20-28

ADAM-5000 Controller Support Table

20-31

ADAM-5000 Remote I/O System Support Table

20-32

ADAM-5550CE

8-slot PC-based Controller with GX2 CPU

20-33

ADAM-5510/TCP

ADAM-5510E/TCP

4-slot PC-based Controller with Ethernet

8-slot PC-based Controller with Ethernet

20-35

ADAM-5510M

ADAM-5510E

4-slot PC-based Controller with RS-485

8-slot PC-based Controller with RS-485

20-37

ADAM-5000L/TCP

ADAM-5000/TCP

4-slot Distributed DA&C System for Ethernet

8-slot Distributed DA&C System for Ethernet

20-39

ADAM-5000/485

ADAM-5000E

4-slot Distributed DA&C System for RS-485

8-slot Distributed DA&C System for RS-485

20-40

ADAM-5090/5091

ADAM-5095

4-port RS-232 Module

2-port CAN Module with Isolation Protection

20-41

ADAM-5013

ADAM-5017

ADAM-5017P

3-ch RTD Input Module

8-ch Analog Input Module

8-ch Analog Input Module with Independent Input Range

20-42

ADAM-5017UH

ADAM-5018

ADAM-5018P

8-ch Ultra High Speed Analog Input Module

7-ch Thermocouple Input Module

7-ch Thermocouple Input Module with Independent Input Range

20-43

ADAM-5024

ADAM-5050

ADAM-5051/D/S

4-ch Analog Output Module

16-ch Universal Digital I/O Module

16-ch Digital Input Module

20-44

ADAM-5052

ADAM-5053S

ADAM-5055S

8-ch Isolated Digital Input Module

32-ch Isolated Digital Input Module

16-ch Isolated Digital I/O Module with LED

20-45

ADAM-5056/D/S

ADAM-5056SO

ADAM-5057S

16-ch Digital Output Module

16-ch Source-type Isolated Digital Output Module with LED

32-ch Isolated Digital Output Module

20-46

ADAM-5060

ADAM-5068

ADAM-5069

6-ch Relay Output Module

8-ch Relay Output Module

8-ch Power Relay Output Module with LED

20-47

ADAM-5080

ADAM-5081

4-ch Counter/Frequency Module

4-ch High Speed Counter/Frequency Module

20-48

ADAM-5202

ADAM-5240

ADAM-5030

2-port AMONet Master Module

4-axis Stepping/Pulse-type Servo Motor Control Module

2-slot SD Storage Module

20-49

PWR-242

PWR-243

DIN-rail Power Supply

Panel Mount Power Supply

20-50

PWR-244

PWR-343

Panel Mount Power Supply

Power Supply Module

20-51

Summary of content (51 pages)

PAGE 1
PC-based Controllers & I/O Modules APAX-5000 Series APAX Series Overview APAX System Architecture Software Tools for PC-based Solutions SoftLogic and HMI Software APAX Controller Selection Guide APAX Communication and Motion Module Selection Guide APAX I/O Module Selection Guide APAX-5520CE PC-based Controller with XScale CPU APAX-5620CE PC-based Controller with XScale CPU and CAN APAX-5570XPE PC-based Controller with Celeron M CPU APAX-5571XPE APAX-6571XPE PC-based Controller with Intel Atom CPU APAX-
PAGE 2
APAX Series Overview Introduction APAX-5000 series are designed for industrial automation and combine the openness and ﬂexibility of PCs with the reliability of PLCs. APAX-5000 utilizes a sophisticated thermal design to ensure the system stability. Due to the dual thermal pipes inside the heatsink, the thermal dissipation capability can keep the system working under high computing by integrating multiple tasks in one platform.
PAGE 3
New Generation PAC CPU Module Scalability 19 20 21 22 23 24 25 26 27 Embedded Controllers The APAX family offers various CPU modules with different processors in order to meet different requirement of control tasks. APAX-6571: Intel Atom CPU, 1.6 GHz processor PC-based Controllers APAX-5571: Intel Celeron M CPU, 1.
PAGE 4
APAX System Architecture Introduction To simplify the system conﬁguration, Advantech’s APAX-5000 series provides an easy and ﬂexible way to setup different functions and conﬁgurations. There are multiple APAX series system combinations that can be selected to develop reliable control systems as detailed below.
PAGE 5
Software Tools for PC-based Solutions PC-based Programming Software 19 20 21 22 23 24 25 26 27 Embedded Controllers Advantech PAC offers the seamless software integration for automation application.
PAGE 6
SoftLogic and HMI Software SoftLogic Programming Software Introduction In automation control market, IEC 61131-3 becomes an international standard control language, Advantech’s APAX-5000 series leveraged a programming software which is called Multiprog running on Window OS. It not only provides normal programming tools, but also leverages advanced testing and debugging tools.
PAGE 7
Enabling Project Efﬁciency 19 20 21 22 23 24 25 26 27 System Backup Functions Utility for Advantech PAC APAX-5000 series delivers system backup functionality. To leverage this functionality, two controllers with the same control program, are installed in one system. After both controllers' backup function is enabled, the APAX-5000 system will automatically delegate one of the two controllers as the master controller.
PAGE 8
APAX Controller Selection Guide System APAX-5520CE APAX-5620CE APAX-5570XPE APAX 5570XPE APAX-5571XPE APAX 5571XPE Celeron M 1 GHz Celeron M 1.5 GHz APAX-6571XPE CPU XScale PXA270 520 MHz Memory Flash 32 MB, SDRAM 64MB 512 MB DDR2 DRAM 1GB DDR2 SDRAM 1 x CF slot (internal) Atom 1.6 GHz Storage 1 x CF slot (internal) 1 x SD card slot Local Display VGA DVI-I DVI-I USB Ports 1 x USB 1.1 4 x USB 2.0 2 x USB 2.
PAGE 9
APAX Communication and Motion Module Selection Guide Coupler Modules 19 20 21 22 23 24 25 26 27 Embedded Controllers PC-based Controllers PAC Module Name APAX-5070 APAX-5071 APAX-5072 Description Modbus/TCP Communication Coupler Proﬁnet Communication Coupler Ethernet/IP Communication Coupler Protocol Modbus/TCP Proﬁnet Ethernet/IP Data Transfer Rates 10/100 Mbps 100 Mbps 10/100 Mbps Communication General Connected I/O Modules 32 (max.)* Digital Signals 2048 (max.
PAGE 10
APAX I/O Module Selection Guide Module Name APAX-5013 Description AI Channels Analog Input APAX-5017 APAX-5017H APAX-5018 APAX-5028 8-ch RTD Module 12-ch AI Module 12-ch High Speed AI Module 12-ch Thermocouple Module 8-ch AO Module 8 12 12 12 - Input Type* RTD (2-wire or 3-wire) V, mV, mA V, mV, mA V, mV, mA, Thermocouple Sampling Rate (Samples/second) 10 (Total**) 12 (Total**) 1000 (per channel) 12 (Total**) Input Resolution 16-bit 16-bit 12-bit 16-bit - Voltage Input -
PAGE 11
19 20 21 22 23 24 25 26 27 Embedded Controllers PC-based Controllers PAC Module Name APAX-5040 APAX-5045 APAX-5046 APAX-5060 APAX-5080 Description 24-ch DI Module 24-ch DI/O Module 24-ch DO Module 12-ch Relay Module 4/8-ch Counter Module DI Channels 24 12 - - 4 Source Load Digital Input Counter Input Digital Output General Input Type Sink or Source Load Sink or Source Load - - Rated Input Voltage 24 VDC 24 VDC - - 24 VDC Input Voltage Range (signal "0") -5 ~ 5 VDC -5 ~
PAGE 12
APAX-5520CE PC-based Controller with XScale® CPU Features NEW Onboard XScale® PXA270 520 MHz processor 64 MB SDRAM on board, 32 MB Flash Expands I/O by connecting with APAX-5000 I/O modules Windows CE .NET ready platform 1 x VGA port for display and 1 x USB ports 1 x CompactFlash slot for data logging 1 x 10/100 Mbps LAN and 1 x RS-485 ports Provides C/C++ and .
PAGE 13
APAX-5620CE PC-based Controller with XScale® CPU and CAN Features NEW 19 20 21 22 23 24 25 26 27 Embedded Controllers Onboard XScale® PXA270 520 MHz processor 64 MB SDRAM on board, 32 MB Flash Expands I/O by connecting with APAX-5000 I/O modules Windows CE .NET ready platform 1 x VGA port for display and 1 x USB port 1 x CompactFlash slot for data logging 2 x 10/100 Mbps LAN, 2 x RS-485 and 2 x CANopen interface Provides C/C++ and .
PAGE 14
APAX-5570XPE APAX-5571XPE PC-based Controller with Celeron® M CPU Features Intel® Celeron® M 1 GHz or 1.5 GHz CPU processor Expands I/O by connecting with APAX-5000 I/O modules Provides complete C/C++ and .
PAGE 15
APAX-5570XPE APAX-5571XPE 19 20 21 22 23 24 25 26 27 Embedded Controllers Diagnostic LEDs LAN Rotary ID Switch PC-based Controllers PAC LAN1 Reset Button Motion Control SD Card Slot and Battery USB RS-485 I/O Ethernet I/O RS-232 Audio DVI-I Display Heatsink APAX-5520KW or APAX-5620KW for dual-controller architecture Heatsink I/O Modules Building Automation Self-service Terminals I/O Modules eHome Platforms Power Input and RS-422/485 Terminal Fan (APAX-5571XPE only) Backplane (with 1
PAGE 16
APAX-6571XPE PC-based Controller with Intel® Atom™ CPU Features NEW Onboard Intel® Atom™ 1.6 GHz Two RS-232/422/485 ports with automatic ﬂow control 2 x 10/100/1000 Mbps Ethernet ports 2 x External USB for dongle and ﬂash drive DIN-rail design for easy installation in ﬁeld cabinet Windows XP Embedded ready platform Expands I/O by connecting with APAX I/O modules Provides C/C++ and .NET class libraries for C or Microsoft VS .
PAGE 17
APAX-5070 APAX-5071 APAX-5072 NEW Modbus/TCP Communication Coupler Proﬁnet Communication Coupler Ethernet/IP Communication Coupler NEW 19 20 21 22 23 24 25 26 27 Embedded Controllers NEW PC-based Controllers PAC Motion Control 5R+6 APAX-5070 COMPLIANT 5R+6 APAX-5071 5R+6 APAX-5072 COMPLIANT COMPLIANT RS-485 I/O Speciﬁcations Speciﬁcations Speciﬁcations General General General Certiﬁcations Dimensions (W x H x D) Enclosure Weight Connector C
PAGE 18
APAX-5202P APAX-5090P APAX-5095P 2-port AMONet Master Module 4-port RS-232/422/485 Communication Module 2-port CANopen Communication Module NEW 5R+6 APAX-5202P 5R+6 APAX-5090P COMPLIANT COMPLIANT Speciﬁcations Speciﬁcations General General Certiﬁcations Interface CE, FCC class A 2 x AMONet (Half duplex RS-485 with transformer isolation) RJ-45 Active, Error for each port 30 x 139 x 100 mm Connectors LED Indicators Dimensions (W x H x D) Enclosure ABS+PC Weig
PAGE 19
APAX-5013 APAX-5017 APAX-5018 8-ch RTD Module 12-ch Analog Input Module 12-ch Thermocouple Input Module 19 20 21 22 23 24 25 26 27 Embedded Controllers PC-based Controllers PAC Motion Control RS-485 I/O 5R+6 APAX-5013 APAX-5017 COMPLIANT Speciﬁcations Speciﬁcations General General Certiﬁcations CE, FCC class A Dimensions (W x H x D) 30 x 139 x 100 mm Enclosure ABS+PC Weight 170 g Power Consumption 2.
PAGE 20
APAX-5017H APAX-5028 8-ch Analog Output Module 5R+6 APAX-5017H Speciﬁcations General General Certiﬁcations CE, FCC class A Dimensions (W x H x D) 30 x 139 x 100 mm Enclosure ABS+PC Weight 175 g Power Consumption 3.
PAGE 21
APAX-5040 APAX-5045 24-ch Digital Input Module 24-ch Digital Input/Output Module 19 20 21 22 23 24 25 26 27 Embedded Controllers PC-based Controllers PAC Motion Control RS-485 I/O 5R+6 APAX-5040 Speciﬁcations Speciﬁcations General General Certiﬁcations CE, FCC class A Dimensions (W x H x D) 30 x 139 x 100 mm Enclosure ABS+PC Weight 160 g Power Consumption 2 W @ 24 VDC (typical) Status Display LED per channel On: Logic level 1 Off: Logic level 0 Digital In
PAGE 22
APAX-5046 APAX-5060 APAX-5080 24-ch Digital Output Module 12-ch Relay Output Module 4/8-ch High Speed Counter Module 5R+6 APAX-5046 5R+6 APAX-5060 COMPLIANT Speciﬁcations Speciﬁcations General General Certiﬁcations Dimensions (W x H x D) Enclosure Weight Power Consumption Status Display CE, FCC class A 30 x 139 x 100 mm ABS+PC 165 g 2.
PAGE 23
APAX-5343 APAX-5343E APAX-5001/5002 Power Supply for APAX-5570 Series Power Supply for APAX Expansion Modules 1-slot/2-slot Backplane Module 19 20 21 22 23 24 25 26 27 Embedded Controllers PC-based Controllers PAC Motion Control RS-485 I/O APAX-5343 APAX-5343E APAX-5001 5R+6 COMPLIANT APAX-5002 5R+6 COMPLIANT Speciﬁcations Speciﬁcations Input General Rated Voltage Voltage Range Rated Input Current Rated Input Frequency Input Frequency Range Inrush Curr
PAGE 24
ADAM-5000 Series ADAM-5000 Series Distributed I/O Systems Ethernet-based Data Acquisition and Control System With the ADAM-5000/TCP as your Ethernet I/O data processing center, you can monitor and control ﬁeld signals at a speed of 10/100 Mbps. The best ﬁeld-proven communication performance that can be reached in industrial network environments. Additionally, the popular Modbus/TCP protocol is supported as well.
PAGE 25
Distributed I/O Systems & PC-based Controllers Maximum System Design Flexibility Proven for Industrial Environments The ADAM-5000's modular design allows users to tailor solutions based on their own requirements. Built-in programmable I/O ranges and alarm outputs enhance ﬂexibility in system design. A variety of communication media such as twisted-pair wiring, radio modems and ﬁber optics are supported.
PAGE 26
ADAM-5000 Controller Selection Guide System ADAM-5510M ADAM-5510E ADAM-5510/TCP ADAM-5510E/TCP ADAM-5550CE CPU 80188 AMD Geode GX533 (GX2) RAM 640 KB 128 MB DDR SDRAM Flash ROM 256 KB - Flash Memory 256 KB - Flash Disk 1 MB - OS ROM-DOS WinCE 5.
PAGE 27
Controller Selection Guide 19 20 21 22 23 24 25 26 27 Embedded Controllers PC-based Controllers PAC System ADAM-5000/485 ADAM-5000E ADAM-5000L/TCP ADAM-5000/TCP CPU 80188 80188 RAM - - 4 MB Flash ROM (User AP) - - 512 KB Flash Memory (Data Storage) - - - Flash Disk - - real-time OS RISC CPU OS - - Timer BIOS - - - Real-time Clock - - - 4 8 Watchdog Timer I/O Slots Motion Control RS-485 I/O Ethernet I/O Yes Power Consumption 3W 4 8 4.0 W 5.
PAGE 28
ADAM-5000 I/O Module Selection Guide Analog Input/Output Modules Module Analog Input ADAM-5013 ADAM 5013 ADAM-5017 ADAM 5017 A 7 ADAM-5017P ADAM 5017P P ADAM-5017UH ADAM 5017UH A ADAM-5018 ADAM-5018P Resolution 16 bit 16 bit 16 bit 12 bit 16 bit 16 bit Input Channel 3 8 8 8 7 7 Sampling Rate 10 (total**) 10 (total**) 10 (total**) 200K* 10 (total**) 10 (total**) ±150 mV ±500 mV ±15V ±10V ±5 V ±1 V 0 ~ 150mV 0 ~ 500mV 0 ~ 1V 0 ~ 5V 0 ~ 10V 0 ~ 15V ±10 V 0 ~ 10 V ±15 mV ±50 mV ±
PAGE 29
Digital Input/Output Modules 19 20 21 22 23 24 25 26 27 Embedded Controllers Em PC-based Controllers PC PAC PA ADAM-5055S ADAM 5056/ ADAM-5056/ ADAM-5056D ADAM 5056S/ ADAM-5056S/ ADAM-5056SO ADAM-5057S ADAM-5060 Digital Input Channels 8 w/LED - - - - Digital Output Channels 8 w/LED 16 (ADAM-5056) 16 w/LED (ADAM-5056D) 16 w/LED 32 6 relay (2 form A/4 form C) Isolation 2,500 VDC - 2,500 VDC 2,500 VDC - Page 20-45 Module Digital Input and Digital Output 20-46 20-47 Motion Contr
PAGE 30
ADAM-5000 I/O Module Selection Guide Motion and Storage Modules Model Axes Advanced Functions ADAM-5202 ADAM-5240 ADAM-5030 ADAM 5030 Number of Axes - 4 - Linear Interpolation - v - 2-Axis Circle Interpolation - v - Encoder Channels - 4 - Limit switch Input Channel - 8 - Home Input Channel - 4 - Emergency stop Input Channel - 1 - Slow Down Limit Switch - 8 - Servo On Output Channel - 4 - General Purpose DO Channel - 4 - Position Compare Event - V - Remote Mo
PAGE 31
ADAM-5000 Controller Support Table Type PAC PC-based Controller ADAM-5550KW ADAM-5510KW ADAM-5510EKW ADAM-5510KW/TCP ADAM-5510EKW/TP ADAM-5550CE ADAM-5510/TCP ADAM-5510E/TCP ADAM-5510M ADAM-5510E I/O Module 8-slot Micro PAC with GX2 CPU 4/8-slot Softlogic Controller w/ RS-485 4/8-slot Softlogic Controller w/ Ethernet 8-slot PC-based Controller with GX2 CPU 4/8-slot PC-based Controller with Ethernet 4/8-slot PC-based Controller with RS-485 ADAM-5013 • • • • • • ADAM-5017P • - - •
PAGE 32
ADAM-5000 Remote I/O System Support Table Remote I/O System Function ADAM-5000/485 ADAM-5000E ADAM-5000L/TCP ADAM-5000/TCP I/O Module Description 4-slot Distributed DA&C for RS-485 8-slot Distributed DA&C for RS-485 4-slot Distributed DA&C for Ethernet 8-slot Distributed DA&C for Ethernet ADAM-5013 3-ch RTD Input • • • • ADAM-5017 8-ch AI • • • • ADAM-5017P 8-ch AI w/ Independent Input Range • • • • ADAM-5017H 8-ch high Speed (1K) AI • • • • ADAM-5017UH 8-ch Ultra high Sp
PAGE 33
ADAM-5550CE 8-slot PC-based Controller with GX2 CPU Features 19 20 21 22 23 24 25 26 27 Embedded Controllers Support VGA port for local display of HMI software Can be operated with or without display/keyboard/mouse Remote monitoring through Web Server Remote maintenance via FTP Server Support .
PAGE 34
ADAM-5550CE COM 1 (RS-232/485 Port) VGA COM 4 (RS-232/485 Port) USB COM3 COM 2 LAN (RS-232) (RS-485) DIP Switch (User Deﬁne) Controller Features Rich Support to ADAM-5000 I/O Modules ADAM-5550CE is designed for control tasks which need Industrial PC’s computing performance and PLC’s robustness. Its multiple functionalities include discrete, analog and motion functions. The .NET class libraries provide a ﬂexible and easy-to-use software solution for versatile applications.
PAGE 35
ADAM-5510/TCP ADAM-5510E/TCP 4-slot PC-based Controller with Ethernet 8-slot PC-based Controller with Ethernet Features 19 20 21 22 23 24 25 26 27 Embedded Controllers 10/100Base-T Ethernet interface Supports Web Server function Supports Email Alarm function Supports FTP Server and Client functions Supports Modbus/TCP Server and Client function libraries Supports Modbus/RTU Master and Slave function libraries 1.
PAGE 36
ADAM-5510/TCP ADAM-5510E/TCP Inserted I/O Module Diagnostic LEDs Wallmounting Hole Power Terminal Ethernet Port Snap Lock Plug-in Screw Terminal Block Node ID Switch Feature Details Supports Powerful Ethernet Features Complete I/O Module and C Library Support ADAM-5510/TCP and ADAM-5510E/TCP are Ethernet-enabled Programmable Controllers. The new 4-slot ADAM-5510/TCP and 8-slot ADAM-5510E/TCP support HTTP server, FTP server, and e-mail alarm functions.
PAGE 37
ADAM-5510M ADAM-5510E 4-slot PC-based Controller with RS-485 8-slot PC-based Controller with RS-485 Features 19 20 21 22 23 24 25 26 27 Embedded Controllers Supports Modbus/RTU Master and Slave function libraries Windows-based utility Control ﬂexibility with C programming Complete set of I/O modules Built-in 1.
PAGE 38
ADAM-5510M ADAM-5510E Wallmounting Hole Inserted I/O Module Diagnostic LEDs Power Terminal Plug-in Screw Terminal Block Node ID Switch Why PC-based Control? Modbus/RTU Master and Slave Function Libraries Today, more and more major manufacturers are gaining a competitive edge by replacing their factory ﬂoor PLC “black boxes” and utilizing the latest advances in automation control technology. One of the major drawbacks of the PLC is its proprietary nature.
PAGE 39
ADAM-5000L/TCP ADAM-5000/TCP 4-slot Distributed DA&C System for Ethernet 8-slot Distributed DA&C System for Ethernet Features ADAM-5000/TCP ADAM-5000L/TCP 19 20 21 22 23 24 25 26 27 Embedded Controllers ARM 32-bit RISC CPU 10/100Base-T auto-negotiation high-speed communication port Supports Modbus/TCP for easy integration Supports UDP event handling function Up to 100 m communication distance w/o repeater Allows remote conﬁguration via Ethernet Allows concurrent access for 8
PAGE 40
ADAM-5000/485 ADAM-5000E 4-slot Distributed DA&C System for RS-485 8-slot Distributed DA&C System for RS-485 Features RS-485 communication for easy installation and networking 4 or 8 slots for up to 128 points data monitoring card control in one module Extensive software support, includes windows DLL drivers, OCX drivers, OPC server and popular HMI/SCADA software drivers Seamlessly integrated with easy-to-use ADAMView data acquisition software Supports ADAM ASCII protocol or Modbus®/RTU protocol
PAGE 41
ADAM-5090/5091 ADAM-5095 4-port RS-232 Module 2-port CAN Module with Isolation Protection 19 20 21 22 23 24 25 26 27 Embedded Controllers PC-based Controllers PAC Motion Control RS-485 I/O ADAM-5090 ADAM-5091 ADAM-5095 5R+6 COMPLIANT 5R+6 COMPLIANT Speciﬁcations Speciﬁcations General General Certiﬁcations Connectors Enclosure LED Indicators Power Consumption CE, FCC Class A (ADAM-5091 only), FM 4 x RJ-45 ABS+PC TX, RX (each port) 0.6 W (max.
PAGE 42
ADAM-5013 ADAM-5017 ADAM-5017P 8-ch Analog Input Module 8-ch Analog Input Module with Independent Input Range 5R+6 ADAM-5013 5R+6 ADAM-5017 COMPLIANT Speciﬁcations 5R+6 ADAM-5017P COMPLIANT COMPLIANT Speciﬁcations Speciﬁcations General General General Certiﬁcations Connectors Certiﬁcations Connectors CE, FM 1 x Plug-in screw terminal (# 14 ~ 22 AWG) Enclosure ABS+PC Power Consumption 1.25 W (max.
PAGE 43
ADAM-5017UH ADAM-5018 ADAM-5018P 8-ch Ultra High Speed Analog Input Module 7-ch Thermocouple Input Module 7-ch Thermocouple Input Module with Independent Input Range 19 20 21 22 23 24 25 26 27 Embedded Controllers PC-based Controllers PAC Motion Control 5R+6 ADAM-5017UH 5R+6 ADAM-5018 COMPLIANT 5R+6 ADAM-5018P COMPLIANT COMPLIANT RS-485 I/O Speciﬁcations Speciﬁcations Speciﬁcations General General General Certiﬁcations Connectors Certiﬁcations
PAGE 44
ADAM-5024 ADAM-5050 ADAM-5051/D/S 5R+6 ADAM-5024 COMPLIANT Speciﬁcations 4-ch Analog Output Module 16-ch Universal Digital I/O Module 16-ch Digital Input Module 5R+6 ADAM-5050 COMPLIANT ADAM-5051 ADAM-5051D ADAM-5051S 5R+6 COMPLIANT Speciﬁcations Speciﬁcations General General General Certiﬁcations Connectors Certiﬁcations Connectors CE, FM 1 x Plug-in screw terminal (# 14 ~ 22 AWG) Enclosure ABS+PC Power Consumption 1.2 W (max.
PAGE 45
ADAM-5052 ADAM-5053S ADAM-5055S 8-ch Isolated Digital Input Module 32-ch Isolated Digital Input Module 16-ch Isolated Digital I/O Module with LED NEW 19 20 21 22 23 24 25 26 27 Embedded Controllers PC-based Controllers PAC Motion Control 5R+6 ADAM-5052 5R+6 ADAM-5053S COMPLIANT COMPLIANT 5R+6 ADAM-5055S COMPLIANT RS-485 I/O Speciﬁcations Speciﬁcations Speciﬁcations General General General Certiﬁcations Connectors CE, FM 1 x Plug-in screw
PAGE 46
ADAM-5056/D/S ADAM-5056SO ADAM-5057S 16-ch Digital Output Module 16-ch Source-type Isolated Digital Output Module with LED 32-ch Isolated Digital Output Module NEW ADAM-5056 ADAM-5056D ADAM-5056S 5R+6 5R+6 ADAM-5056SO COMPLIANT 5R+6 ADAM-5057S COMPLIANT COMPLIANT Speciﬁcations Speciﬁcations Speciﬁcations General General General Certiﬁcations Connectors Certiﬁcations Connectors ADAM-5056/5056D ADAM-5056S Enclosure LED Indicators ADAM-50
PAGE 47
ADAM-5060 ADAM-5069 6-ch Relay Output Module 8-ch Power Relay Output Module with LED 19 20 21 22 23 24 25 26 27 Embedded Controllers PC-based Controllers PAC Motion Control RS-485 I/O 5R+6 ADAM-5060 5R+6 ADAM-5069 COMPLIANT COMPLIANT Speciﬁcations Speciﬁcations General General Certiﬁcations Connectors Enclosure Power Consumption CE 1 x Plug-in screw terminal (# 14 ~ 22 AWG) ABS+PC 1.8 W (max.
PAGE 48
ADAM-5080 ADAM-5081 4-ch Counter/Frequency Module 4-ch High Speed Counter/Frequency Module NEW 5R+6 ADAM-5080 Speciﬁcations Certiﬁcations Connectors Enclosure Power Consumption General CE, FM 1 x Plug-in screw terminal (# 14 ~ 22 AWG) ABS+PC 1.5 W (max.) Certiﬁcations Power Consumption Enclosure LED Counter/Frequency Counter/Frequency Counter Aux. Function Initial preset, hi-low alarm setting, alarm digital output mapping, overﬂag Channels 4 Input Frequency 0.
PAGE 49
ADAM-5202 ADAM-5240 ADAM-5030 2-port AMONet Master Module 4-axis Stepping/Pulse-type Servo Motor Control Module 2-slot SD Storage Module 19 20 21 22 23 24 25 26 27 Embedded Controllers PC-based Controllers PAC Motion Control 5R+6 ADAM-5202 5R+6 ADAM-5240 COMPLIANT 5R+6 ADAM-5030 COMPLIANT COMPLIANT RS-485 I/O Speciﬁcations Speciﬁcations General General Certiﬁcations Power Consumption Enclosure Connectors LED Indictors CE, FCC class A 0.
PAGE 50
PWR-242 PWR-243 PWR-242 DIN-rail Power Supply Panel Mount Power Supply 5R+6 PWR-243 COMPLIANT Speciﬁcations COMPLIANT Speciﬁcations Input Input Input Current Inrush Current (cold) Input Current Inrush Current (cold) 1.2 A max. 20 A/110 VAC 40 A/220 VAC 47 ~ 63 Hz 90 ~ 264 VAC wide input range Input Frequency Input Voltage Short Protection 1.4 A max.
PAGE 51
PWR-244 PWR-343 Panel Mount Power Supply Power Supply Module 19 20 21 22 23 24 25 26 27 Embedded Controllers PC-based Controllers PAC Motion Control RS-485 I/O PWR-244 PWR-343 5R+6 COMPLIANT 5R+6 COMPLIANT Speciﬁcations Speciﬁcations Input Input Input Current Inrush Current (cold) Input Frequency Input Voltage Short Protection 1.4 A max.