User Manual HIT-W121 Computer
Copyright The documentation and the software included with this product are copyrighted 2011 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Technical Support and Assistance 1. 2. Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Read these safety instructions carefully. Keep this User Manual for later reference. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. Keep this equipment away from humidity. Put this equipment on a reliable surface during installation.
17. CLASSIFICATION: - Supplied by Class I adapter - No applied parts - Continuous operation - No AP or APG category 18. Follow national requirements to dispose of unit. 19. Maintenance: To properly maintain and clean the surfaces, use only approved products or clean with a dry cloth. 20. Contact information: No.1, Alley 20, Lane 26, Rueiguang Road Neihu District, Taipei, Taiwan 114, R.O.C TEL: (02) 2792-7818 21. 22. This equipment is not to be used as a life support system. 23.
HIT-W121 User Manual vi
Contents Chapter Chapter 1 Introduction........................................ ... 1.1 1.2 Overview ... ................................................................................................... ... System Configuration... ................................................................................. .. 2 Hardware Description ......................... . 2.1 2.2 General Specifications ..................................................................................
HIT-W121 User Manual viii
1 Chapter 1 Introduction This chapter briefly introduces the HIT-W121 product.
1.1 Overview The HIT-W121 Healthcare Infotainment Terminal is Advantech's standard product with a built-in Windows XP Embedded OS. In addition to providing hospital bedside patient information, remote monitoring, and care functions, the CPU and the LANenabled architecture of the HIT-W121 terminal also serves as an integrated hospital gateway device. The HIT-W121 equipped with an Intel Atom 1.6GHz Dual-core processor, 11.
HIT-W121 User Manual 4
Chapter 2 Hardware Description This Chapter describes the hardware features of the HIT-W121.
2.
2.2 Mechanical Specifications 2.2.1 Mechanical Specifications (Terminal) f System Dimensions: 302.5 (W) x 220.25 (H) x 43.00 (D) mm f Carton Dimensions: 500 (W) x 385 (H) x 160 f Mounting System: VESA 75*75mm standard mounting hole f Net Weight: 3 kg VESA Mount: 75*75 mm or 100*100 mm SCREWS: M4*10 mm Caution Use suitable mounting apparatus to avoid risk of injury.
2.2.
2.3 External View 2.3.1 Front View Front View (Terminal) 2.3.
2.3.
3 Chapter 3 Software Description This Chapter describes the software features of the HIT-W121.
3.1 Windows XP Embedded Software Specifications Real-Time OS Kernel f Windows XPE 7 Language Version Driver List f f f f f f f f Chipset Intel ICH8M Rev: Graphics Intel GMA500 Rev: Audio Realtek Audio ALC880 Rev: 5.10.0.5512 LAN Marvell Yukon Ethernet Controller Rev: 8.61.7.3 Camera D-Max UVC Webcam Rev: 6.11.200.4 Smartcard reader ALCOR micro USB smartcard reader Rev: 5.11.9520.7 Touch Elo TtouchSys. 2216 AccuTouch@USB Rev: 4.4.0.0 WLAN SParkLan WIFI module Rev:1.2.3.
13 HIT-W121 User Manual
HIT-W121 User Manual 14
4 Chapter 4 Design Requirements This Chapter describes the design requirements of the HIT-W121.
4.1 Environmental Specifications Temperature & Humidity f Operating Temperature: 0 ~ 40° C f Storage Temperature: 0 ~ 60° C f Relative Humidity: 0 ~ 95% RH (Non-condensed) Case / Panel Temperature f Less than 40° C @ 25° C ambient temperature (front bezel) Safety f CE EMI f FCC class B approved Vibration: f 10 ~ 18 Hz, 1.5 mm peak-to-peak displacement f 18 ~ 500 Hz, 1 G acceleration 4.
Annex Guidance and manufacturer’s declaration – electromagnetic emissions The model HIT-W121 is intended for use in the electromagnetic environment specified below. The customer or the user of the model HIT-W121 should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment – guidance RF emissions Group 1 The model HIT-W121 uses RF energy only for its internal function.
Information on potential electromagnetic interference and advice on how to avoid or minimize such interference (IEC/EN 60601-1-2:2007) Guidance and manufacturer’s declaration – electromagnetic immunity The model HIT-W121 is intended for use in the electromagnetic environment specified below. The customer or the user of the model HIT-W121 should assure that it is used in such an environment.
Information on potential electromagnetic interference and advice on how to avoid or minimize such interference (IEC/EN 60601-1-2:2007) Guidance and manufacturer’s declaration – electromagnetic immunity The model HIT-W121 is intended for use in the electromagnetic environment specified below. The customer or the user of the model HIT-W121 should assure that it is used in such an environment.
