User manual

UNO-2052E User’s Manual 24
A.9 CompactFlash Master/Slave Jumper Setting (JP3)
The CompactFlash interface uses a primary IDE channel, which could be
set as the master or slave device by changing the setting of JP3.
UNO-2052E has one internal CompactFlash card slot and one external
CompactFlash card slot. Internal CompactFlash card slot supports Com-
pactFlash type I (3mm thick) only and External CompactFlash card slot
supports both Type I and type II (5mm thick) cards.
Master Device (Default): JP3 Closed
Slave Device: JP3 Open