User manual

3 Chapter 1
• Power Supply: 9~36 VDC
• Anti-Shock: 20G@DIN IEC 68 section 2-27, half sine, 11ms
50G@Wall/Panel IEC 68 section 2-27, half sine, 11ms.
• Anti-Vibration: 2G w/ CF@IEC 68 section 2-6, sine, 5~500Hz, 1
Oct./min, 1hr/axis.
1G w/ HDD@IEC 68 section 2-6, sine, 12~300Hz, 1 Oct./min, 1hr/
axis.
• Operating Temperature: -10~55° C @ 5~85% related humidity.
• Related Humidity: 95% @ 40° C.
• Power Consumption: 0.6 A max under +24 V power input or 1.2 A
max under +12 V power input
• Power Requirement: 1 A typical under +24 V power input or 1.5 A
typical under +12 V power input
• Operating Temperature: -10 ~55° C (14 ~ 131° F)
• Chassis Size: (WxLxH) 188.8 x 106.5 x 35.5 mm (7.5" × 4.2" × 1.4")
• Weight: 0.8 kg
1.3 Safety Precautions
The following sections tell how to make each connection. In most cases,
you will simply need to connect a standard cable.
Warning! Always disconnect the power cord from your chas-
sis whenever you are working on it. Do not connect
while the power is on. A sudden rush of power can
damage sensitive electronic components. Only
experienced electronics personnel should open the
chassis.
Caution! Always ground yourself to remove any static elec-
tric charge before touching UNO-2052E. Modern
electronic devices are very sensitive to static elec-
tric charges. Use a grounding wrist strap at all
times. Place all electronic components on a static-
dissipative surface or in a static-shielded bag.