User's Manual

5.1.3 Please press “ESC” to skip startup.nsh, it will show “Shell >” message
5.1.4 When system only install a USB flash, EFI shell will detect USB flash as
“fs0”, if system install 2 USB flash , EFI shell will detect USB flash as “fs0” and
“fs1”.
5.1.5 Kindly key-in “USB ID” whether BIOS file is located. (Example: the
system only install a USB flash, it needs key-in “fs0” into USB flash)
5.1.6 Kindly key-in sub-directories whether BIOS file is located. (Example: the
BIOS file put in /FWA1010VC/BIOS)