FWA-1010VC Network system with Intel® Atom® C2000 Processor Platform Packing List Before you begin installing your card, please make sure that the following items have been shipped: • One FWA-1010VC System • One space of accessories • One warranty certificate If any of these items are missing or damaged, please contact your distributor or sales representative immediately. Note 1: Acrobat Reader is required to view any PDF file.Acrobat Reader can be downloaded at: www.adobe.com/Products/acrobat/readstep2.
1. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT: 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
2. HARDWARE INSTALLATION INTRODUCTION 2.1 MEMORY INSTALLATION 2.1.
2.2 2.5” SSD BRACKET INSTALLATION=> 2.2.1 Get 4 pcs M3*4.0L screws & SSD bracket from accessory box M3*4.
2.2.2 Use screwdriver locking 4 screws to fix 2.5” SSD in SSD bracket. 2.2.
2.2.4 Use screwdriver locking 4 screws to fix SSD bracket on FWA-1010VC, SSD SATA & power connector side needs face from chassis side. 2.2.5 Please connect SATA & Power cable to SSD connectors.
2.3 M.2 SSD INSTALLATION 2.3.1 Get M.2 module & Screw M3*3.5 (P/N: 1930006888-01) 2.3.2 Use screwdriver locking a screw to fix M.2 module and FWA-1010VC M/B.
2.4 WallMount Kit Installation Get 6 pcs M3*4L screws from accessory box Use screwdriver locking 6 screws to fix WallMount Kit bracket on FWA-1010VC 2.
3. BIOS CONSOLE REDIRECTION SETTING 3.1 CONSOLE REDIRECTION FUNCTION INSTALL &SETTING 3.1.1 FWA-1010VC doesn’t have a VGA function; user needs to use console-redirection cable(please contact your Advantech contact window to order this cable) to control FWA-1010VC function, 3.1.
3.1.3 Choose “Advanced” “Serial Port Console Redirection” item. 3.1.
3.1.5 Baud rate setting is 115200,8,n1, and “Redirection after BIOS POST” is Always.
4. FWA-1010VC QUICK START IMAGE INSTALLATION AND SETTING Advantech provided FWA-1010VC Quick Start Linux image which is based on Ubuntu Linux distribution and is configured to run on FWA-1010VC for vE-CPE and SD-WAN applications. Useful software utilities and tools which are either Advantech proprietary or are under opens source license are integrated into the image to provide customers with a quick and easy approach for platform evaluation.
5. FWA-1010VC BIOS FLASH STEP 5.1 FWA--1010VC BIOS flash step. FWA-1010VC BIOS V016 or latest version are support flash BIOS by UEFI shell, when user needs flash er below step to flash FWA-1010VC BIOS. 5.1.1 Please copy BIOS & flash tool (ex: fpt.efi) in USB flash, and insert USB flash to FWA-1010VC. 5.1.
5.1.3 Please press “ESC” to skip startup.nsh, it will show “Shell >” message 5.1.4 When system only install a USB flash, EFI shell will detect USB flash as “fs0”, if system install 2 USB flash , EFI shell will detect USB flash as “fs0” and “fs1”. 5.1.5 Kindly key-in “USB ID” whether BIOS file is located. (Example: the system only install a USB flash, it needs key-in “fs0” into USB flash) 5.1.6 Kindly key-in sub-directories whether BIOS file is located.
5.1.7 Kindly key-in “fpt.efi 0f “BIOS file” to flash FWA-1010VC BIOS, and please don’t power off system during the flash BIOS. 5.1.8 When BIOS flash finish. Please power off and re-power on system, the system BIOS will flash to new version.
6. SYSTEM PLATFORM SKUS FWA-1010VC-4CA2S: Tabletop 1x 60W Power Adaptor, CPU 4Core C2558 1x M.2 2280 SSD slot, 7x 1GbE Ethernet port, 2x 1GbE SFP port and 4x 1GbE switched Ethernet port with 1GbE uplink to CPU FWA-1010VC-8CA2S: Tabletop 1x 60W Power Adaptor, CPU 8Core C2758, 1x 2.5” SSD bracket, 1x M.
6.
6.1.1 Front Side FWA-1010VC System Front View 6.1.
6.
7. NAMB-1010VCMB JUMPER SETTING AND CONNECTOR LIST 7.
NAMB-1010VCMB Bot side Connector Placement Location DC_JACK1 CN75 CN41 CN76 Description DC POWER JACK 4P 90D(M) DIP 2DC-0006-B01 USB Conn 4P 90D(F) DIP USB-1F0401-2W PHONE JACK RJ45 8P 1.02mm 90D(F) DIP C20GY0-500 For USB Function. For Console. For 2x1 LAN w/ Combo RM3-1TJA9V Media. SFP+ 1x2 Cage 90D(M) 3S1020F7-AJ4-4F CN79 RJ45_40P_RB4-109D9F1D JP1 DC12V Power Input. PHONE JACK RJ45 28P 2.54mm 90D(F) DIP CN77 CN78 Comment PHONE JACK RJ45 12P 1.
Location CN44 FAN1 SPI1 CN40 CN74 CN45 CN1 CN30 CN4 CN_PWR1 J3 J6 J5 J7 J4 CN_MINI1 CN71 CN70 Description WAFER BOX 2P 3.96mm 180D(M) DIP 3961-WS-2-LF WAFER 2.54 1*4P 180D(M) DIP 744-81-04TW30 IC SKT 8P SMD 8P SMD ACA-SPI-004-K01 WAFER BOX 2x5P 2.00mm 180D(M) DIP 24W2140-10S10 PCI-E MKEY NGFF_75P_AS0BC21-S40BM-7H WAFER 4P 2.5mm 180D(M) DIP 24W1161-04S10-01T Serial ATA 7P 1.27mm 180D(M) DIP WATM-07DBN4A3B8 Comment For Power Switch Cable. For system cooler use. For CPU BIOS EEPROM. For TPM and LPC function.
7.2 Jumper Setting Clear CMOS Header (JP1) Use a three pin header. For Clear CMOS data Clear CMOS Jumper Definition Pitch: 2.00mm Jumper Circuit Comme 1-2 Installed Pull up Pull up to +VBAT 3.3V, Normal nt status (Default) 2-3 Installed Pull down Pull to ground to clear CMOS JP1 Symbol (NAMB-1010VCMB) Fan Header Locations of the fan headers shall accommodate circulation of fresh air from the front of the chassis. FAN Header 4 Pin (FAN1).
SATA Power CONNECTOR SATA Power Connector (CN45) CN45 Symbol (NAMB-1010VCMB) DC12V Power CONNECTOR Power Switch Connector(CN44) CN44 Symbol (NAMB-1010VCMB) LPC CONNECTOR LPC Connector(CN40) CN40 Symbol (NAMB-1010VCMB)
