User`s manual

21 Appendix C
C.2 OSD Function
Each selected value is stored into LCD memory after SEL signal input or
time out. The stored values are not affected if the power is turned off. But
the selected value is not available in case a selected mode is changed
before time out or power is turned off before time out.
Figure C.1: OSD Menu
C.2.1 Feature Descriptions
1. Brightness: Press the < and > keys to adjust the brightness.
2. Black level: Press the < and > keys to adjust digital black level con-
trol
3. Contrast: Press the < and > keys to adjust the contrast.
4. Color: This function individually adjusts the three RGB (Red,
Green, Blue) color contrast. When adjusting the RGB color con-
trast, you need to change to contrast window.
5. Position: Press the < and > keys to select the H-position and V-
position to adjust the screen
6. Image: Press the < and > to select the Phase/clock
7. Auto: Press the < and > to select Yes/No to apply the auto configu-
ration