User manual

FPM-3170 Series User Manual 36
Appendix C OSD Operation
C.1 OSD Operation Keypad
The OSD keypad, including six keys and a two color indicator, is
designed as the OSD operation interface.
The six keypad functions are in Table C-1.
Table C-1: Keypad functions
Note 1: When the display ON/OFF button is ON, the constant green light
means that the COMMON board detects the input signal and ends output sig-
nal to LCD panel. The orange light means that the COMMON board does not
detect the input signal.
Note 2: When the display ON/OFF button is OFF, the flashing green light
means that the display backlight is OFF. When the light shows no color, the
display is powered off.
Note 3: If auto setup would like to be selected, please follow the procedure
below:
1. Press the auto button
2. Press the sel button, then select the save icon to save the current status.
3. The auto setup procedure finishes.
Note 4: If the OSD needs to be locked, press the < and > at the same time
until the .Lock. indicator appears on the display. To unlock, repeat the
same procedures once more.
Auto Press this button to execute auto adjustment process
Sel Press to show the OSD screen or select an item to
change its setting
! # To move between items or increase or decrease setting
Exit This key has two functions:
1.) To exit from the current setting in OSD function
2.) To switch the input source between RGB, Video and
S-Video
On/OFF Turns display backlight ON and OFF