User manual

FPM-3170 Series User Manual 34

Appendix B Supported Input Timing

Modes

B.1 Supported Input Timing Modes

The nineteen kinds of timings below are already programmed into this

module. The input synchronous signals are automatically recognized.

Table B-1: Supported Input formats

Note 1: Even if the preset timing is entered, a little adjust-

ment of the functions such as Horizontal period,

CLK-delay and display position, are required. The

adjusted values are memorized in every preset num-

ber.

Note 2: This module recognizes the synchronous signals

with near preset timing of the frequency of the HS

and Vsync, even in the case that the signals other

than the preset timing that were entered.

Note 3: Because adjustments may not fit, such as differing

magnifying ratios or, in the case that you use it

except for the display timing that was preset.

56H z 60H z 70H z 72H z 75H z 85H z

640x480

Yes

YesYesX

800x600

YesYesYesYesYesX

1024x768

YesYesYesX

1280x1024

YesYesYesX

1600x1200

Yes

Vertical Frequencies

Resolution