User manual

15 Appendix A Driver Installation
A.2.5 Chemical Resistance
The touch screen surface finish is unaffected by exposure to the following
chemicals for a period of one hour at 22..C, 45% relative humidity.
• ASTM-F-1598-95.
• Tea, Coffee, Ketchup, Mustard, Vinegar, Beer, Coca-Cola, Red Wine,
Cooking Oil, Wisk Laundry Detergent, Fantastik All Purpose Cleaner,
Joy Dishwashing Liquid, Windex, Formula 409 Cleaner, Clorox
Bleach (5.25%), Hydrogen Peroxide (3%), Lysol, Ethyl Alcohol, Iso-
propyl Alcohol Accetone, Methyl Ethyl Ketone (MEK), Toluene, Con-
centrated Hydrochloric Acid, Naptha, Mineral Spirits, Gasoline,
10W30 Motor Oil, Diesel Fuel, Transmission Fluid, Brake Fluid, Anti-
freeze, Hydraulic Oil.
A.3 Installation of Touchscreen Driver
The touchscreen in the FPM-3170 Series provides drivers for use with
Windows 2000 and XP. For a detailed touchscreen drivers installation
procedure, please refer to the folder:
\Touch-Screen-DRV\Penmount 9000(resistive)
Before installing the Windows 2000/XP driver software, you must have
the Windows 2000/XP system installed and running on your computer.
You must also have one of the following PenMount Serial Interface con-
troller boards installed: 90A4, 9026B, 9036 or 9084. Contents of the Pen-
Mount Windows 2000/XP driver folder are listed below.
DMC9000.inf
DMC9000.sys
DMC9000.cat
SETUP.EXE
Note 1: The following windows illustrations are examples
only. You must follow the flow chart instructions
and pay attention to the instructions which then
appear on your screen.