User`s manual

22 FPM-3159 Series User's Manual
Note 1:
SETTING SERIAL DATA FOR EXPANSION
Preset
No
Display Size
Vsync
(Hz)
Hsync
(kHz)
SYSTEM
CLK
(MHz)
V
Pulse
(H)
V
B.Porch
(H)
H
Pulse
(CLK)
H
B.Porch
(CLK)
Sync
Logic
V,H
Remarks
1 640x400 56.432 24.830 21.053 8 25 96 48 -,-
*1
2 640x480 59.992 31.469 25.175 2 33 96 48 -,-
vga
3 720x400 70.087 31.469 28.322 2 35 108 45 +,-
vga txt
4 800x600 60.317 37.879 40.000 4 23 128 88 +,+
vesa
5 640x480 66.667 35.000 30.240 3 39 64 96 SonG
Macintosh
6 640x480 75.000 37.500 31.500 3 16 64 120 -,-
vesa
7 720x400 85.039 37.927 35.500 3 42 36 144 +,-
vesa
8 640x480 85.008 43.269 36.000 3 25 48 112 -,-
*1
9 1024x768 60.004 48.363 65.000 6 29 136 160 -,-
vesa
10 800x600 75.00 46.875 49.500 3 21 80 160 +,+
vesa
11 832x624 74.565 49.735 57.283 3 39 64 224 SonG
Macintosh
12 800x600 85.061 53.674 56.250 3 27 64 152 +,+
*1
13 1024x768 70.069 56.476 75.000 6 29 136 144 +,+
vesa
14 1024x768 75.029 60.023 78.750 3 28 93 176 +,+
vesa
B.1 Setting serial data for expansion
The fourteen kinds of timing below are already programmed in this
module. The input synchronous signals are automatically recognized.
Note *1: Out of specification.
Even if the preset timing is entered, a little adjustment of the functions
such as Horizontal period, CLK-delay and display position, are
required. The adjusted values are memorized in every preset No.
This module recognizes the synchronous signals with near preset
timing of the frequency of HS, Vsync, even in the case that the signals
other than the preset timing that were entered. For instance, it is
displayed with presetting number 6 in the case of 640×480 dot, HS:
37.861kGz, Vsync: 72.809Hz an example).
Note 2: