User manual

9 Chapter 2
2.1.2 Panel Mounting
Refer to figure 2.2 and follow the instructions below to install in a panel.
1. Insert the FPM-3120G series’ into the cutout hole of the panel.
(The dimensions of the cutout is 304x230mm (11.9"x9.0"))
2. Place eight panel-mounting brackets on FPM-3120G series’ (2 on
the top, 2 on the bottom, 2 on the left, and 2 on the right).
3. Fasten the eight panel-mounting brackets with screws.
4. Mount the FPM-3120G series’ monitor on the panel by the screws
on the ten panel-mounted brackets.
Figure 2.2: Panel Mounting
Figure 2.3: Panel Mounting