User manual

FPM-3060G User Manual 16
Before installing the Windows 2000/XP driver software, you must have
the Windows 2000/XP system installed and running on your computer.
If you have an older version of the PenMount Windows 2000/XP driver
installed in your system, please remove it first. Follow the steps below to
install the PenMount Windows 2000/XP driver.
1. When the system first detects the controller board, a screen appears
that shows “Unknown Device.” Do not use this hardware wizard.
Press Cancel.
2. FPM-3060G-RXE
Insert the Driver CD-ROM. Go to:
\TouchScreen-DRV\PenMount Driver\DMC 9000 (RS-232)
FPM-3060G-UXE
Insert the Driver CD-ROM. Go to:
\TouchScreen-DRV\PenMount Driver\DMC 5000 (USB)