User manual

3 FPM-2120G/2150G/2170G Series User Manual
Chapter 1 General Information
1.3 LCD Specification
1.4 Connectors
The following connectors are situated on the bottom side of the FPM-2120G/2150G/
2170G series:
 VGA Port (DB-15)
This DB-15 connector can be connected to the system via the external 15-pin
DB-15 connector located on the left side of the system unit.
 RS-232 Touchscreen Connector (DB-9) (FPM-2120G/2150G/2170G-R)
This connector will be present only if a touchscreen is installed. It must be con-
nected to the RS-232 port of the PC. The touchscreen cable is included with all
orders which include the touchscreen option.
 Touchscreen Connector (USB)
This connector will be present only if a touchscreen is installed. It must be con-
nected to the USB port of the PC. The touchscreen cable is included with all
orders.
 DC 12 V Power Input Connector
This connector must be connected to DC 12 V power switch.
Specifications
12” LCD
(LED Backlight)
15” LCD
(LED Backlight)
17” LCD
(LED Backlight)
Display Type SVGA TFT LCD XGA TFT LCD SXGA TFT LCD
Display Size 12” 15” 17”
Max. Colors 16.2 M 16.7 M 16.7 M
Max. Resolution 800 x 600 1280 x 1024 1280 x 1024
View Angle
(H/V°)
160°(V), 140°(H) 160°(V), 140°(H) 170°(V), 160°(H)
Luminance
450 cd/m
2
400 cd/m
2
350 cd/m
2
Storage
Temperature
-30 ~ 85°C -30 ~ 80°C -30 ~ 85°C
Operating
Temperature
-30 ~ 85°C -40 ~ 85°C -30 ~ 85°C
Contrast Ratio 700:1 (Typical) 700:1 (Typical) 1000:1 (Typical)
Lamp Life Time
(MTBF)
50,000 hrs. 50,000 hrs. 50,000 hrs.
Warning! Please note before connect the monitor and PC with VGA cable:
1. If PC has installed operation system, please confirm its portrait fre-
quency is within the acceptable range.
2. If PC has installed operation system, users need to adjust the por-
trait frequency to be within the acceptable range.