User Manual FPM-2120G/2150G/ 2170G Series 12"SVGA/15" XGA/17" SXGA Industrial LED Monitor with Resistive Touchscreen, VGA Display Port and DC12 V Input
Copyright The documentation and the software included with this product are copyrighted 2013 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation.
Declaration of Conformity FCC Class A Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Safety Instructions 1. 2. 3. Read these safety instructions carefully. Keep this User Manual for later reference. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation.
NOTE Warning If the customer user DC power by oneself for this product may cause the radio interference in which case, the customer must be to take adequate measures. Warning If the customer needs adapter listed on the adapter not listed on interference in which measures to use power adapter, please use the power product datasheet.
Contents Chapter 1 General Information ............................1 1.1 1.2 Introduction ............................................................................................... 2 Specifications ............................................................................................ 2 1.2.1 General ......................................................................................... 2 1.2.2 Touchscreen (Optional) ................................................................
FPM-2120G/2150G/2170G Series User Manual viii
Chapter 1 1 General Information Sections include: Introduction Specifications LCD Specification Power Consumption Connectors Dimensions
1.1 Introduction Advantech's FPM-2120G/2150G/2170G is a 12"/15”/17” color TFT LED flat panel monitor built specifically for industrial applications. With the optional touchscreen, FPM-2120G/2150G/2170G is an excellent and user-friendly system control interface. In addition to its usual application as an LED panel monitor,FPM-2120G/2150G/ 2170G comes standard with direct VGA control signal inputs, making it compatible with Industrial PCs and Workstations.
Specifications 12” LCD (LED Backlight) 15” LCD (LED Backlight) 17” LCD (LED Backlight) Display Type SVGA TFT LCD XGA TFT LCD SXGA TFT LCD Display Size 12” 15” 17” 16.2 M 16.7 M 16.7 M Max.
1.5 Dimensions Panel Cut-out Dimensions: 303.3x229.3mm (11.94"x9.03") Unit:mm Figure 1.
100.00 [3.94] 75.00 [2.95] 130.00 [5.12] 100.00 [3.94] 75.00 [2.95] Unit: mm 121.70 [4.79] Figure 1.2 FPM-2150G Dimensions General Information 15.00 [0.59] Chapter 1 48.13 [1.89] 18.50 [0.73] 4.50 [0.18] FPM-2120G/2150G/2170G Series User Manual 5 372.60 [14.67] 308.26 [12.14] 270.59 [10.65] 383.00 [15.08] 214.10 [8.43] 296.60 [11.68] Panel Cut-out Dimensions: 374.6 x 298.6 mm (14.75" x 11.75") 307.00 [12.
Figure 1.3 FPM-2170G Dimensions Unit:mm 6 FPM-2120G/2150G/2170G Series User Manual Panel Cut-out Dimensions: 400.92x334.42mm (15.78"x13.
Appendix A Touchscreen A
A.1 Introduction The FPM-2120G/2150G/2170G Series touchscreen uses advanced 5-wire resistive technology. It provides more accurate sensing capacity than other technologies. The touchscreen is specially designed for tough industrial environments, and has been approved to FCC Class A standards. A.2 Touchscreen Specifications (12”/15”/17”) A.2.1 Typical Optical Features Specification 12” Light Transmission > 80% Haze < 13% 15” 17” A.2.
Appendix B OSD Operation Keypad B
B.1 OSD Board Overview The OSD keypad, including six keys and a two color indicator, is designed as the OSD operation interface. Select/ Confirm Auto Adjustment Increase rightness Decrease Brightnss LED Power ignal Exit B.1.1 OSD Button Description Table B.1: OSD Button Description Power Turn the monitor power ON or OFF. Exit Exit menu. Increase Brightness Increase the monitor backlight brightness. Decrease Brightness Decrease the monitor backlight brightness.
Appendix B OSD Operation Keypad 11 FPM-2120G/2150G/2170G Series User Manual
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
