User manual

FPM-3151G User Manual 4
1.5 Environment
• Operation Temperature: -20 ~ 60°C (-4 ~ 140°F)
• Storage Temperature: -30 ~ 80°C (-22 ~ 176°F)
• Relative humidity: 10 ~ 95% non-condensing
• Waterproof: Front panel NEMA4/IP65 compliant
• Shock: 11ms, 10G (Non Operating, Half Sine Wave)
• Vibration: 5 ~ 500 Hz, 1 Grms (Operating, Random)
1.6 Connectors
VGA Port (DB-15)
This DB-15 connector can be connected to the system via the external
15-pin DB-15 connector locatd on the left side of the system unit
DVI Port (DVI-D)
Connected with a standard DVI connector thru I/O port of this unit. Only
supports digital signals
DC 12V Power in (DC Power Jack)
This connector is connected to the DC 12V Switching Power Supply.
DC 24V Power in (Phoenix Jack)
This connector is connected to a DC 24V power supplier with an
accepted range from 19V
DC
to 30V
DC
.
Touchscreen Connector (USB) (Optional)
This connector will be present only if a touchscreen is installed. It must
be connected to the USB port of the PC. The touchscreen cable is
included with all orders which include the USB touchscreen option.
Touchscreen Connector (DB-9) (Optional)
This connector will only be present if a touchscreen is installed. It must
be connected to the RS-232 port of the PC. The touchscreen cable is
included with all orders which include the RS-232 touchscreen option.
Note: If RS-232 or USB touchscreen are used at the same
time, only the USB touchscreen will be available.