Specifications

2.4 Installation Procedure
The ES-3115 can only be powered by an AC electrical outlet adapter (90 ~
240 volts). Be sure to always handle the power cord and power adapter by
holding the plug ends only.
1. Make sure that the system power is turned off.
2. Connect the VGA cable and RS-232 cable between the ES-3115 and
your PC system.
3. Plug the 2-way power cord to the power adapter. Plug the adapter cable
to the DC 12V jack of ES-3115.
4. Connect the 2-pin male plug of the power cord to an electrical outlet.
5. Turn on the PC system.
2.5 OSD Control
OSD buttons
Adjusting with OSD control
Five different keys are well-defined for operation. They are labeled on the
keypad.
1.
(Power KEY)
is designated for Power On/Off