User Manual

EKI-6331AN-BE/EKI-6332GN-AE User Manual 40
5.1 Password
From “Password Settings” in “Management”, you can change the password to man-
age your IEEE 802.11n VAC Access Point.
Figure 5.1 Password Settings
 Current Password:
Enter the current password.
 New Password:
Enter the new password.
 Confirm Password:
Enter the new password again for confirmation.
5.2 Upgrade Firmware
Open “Firmware Upload” in “Management” and follow the steps below to upgrade
firmware locally or remotely through IEEE 802.11n VAC Access Point’s Web:
Figure 5.2 Firmware Upgrade
 Click “Browse” to select the firmware file you would like to load;
 Click “Upload” to start the upload process;
 Wait a few minutes, the VAC Access Point will reboot after successful upgrade.
Note! The password is case-sensitive and its length cannot exceed 19 charac-
ters!