User Manual

EKI-6331AN-BE/EKI-6332GN-AE User Manual 26
 Authentication RADIUS Server
This is for RADIUS authentication. It can communicate with RADIUS through IP
Address, Port and Shared Secret.
– IP Address: Enter the IP address of the Radius Server;
– Port: Enter the port number of the Radius Server;
– Shared Secret: This secret, which is composed of no more than 31 charac-
ters, is shared by EKI-6332GN-AE/EKI-6331AN-BE and RADIUS during
authentication.
 Global-Key Update:
Check this option and specify the time interval between two global-key updates.
3.8 Basic Wireless Settings
Open “Basic Settings” in “Wireless” as below to make basic wireless configuration.
Figure 3.8 Basic Wireless Settings
 Disable Wireless LAN Interface:
Check this option to disable WLAN interface, then the wireless module of EKI-
6332GN-AE/EKI-6331AN-BE will stop working and no wireless device can con-
nect to it.
 Operation Mode:
Four operating modes are available in EKI-6332GN-AE/EKI-6331AN-BE.
– AP: EKI-6332GN-AE/EKI-6331AN-BE establishes a wireless coverage and
receives connectivity from other wireless devices.
– Wireless Client: EKI-6332GN-AE/EKI-6331AN-BE is able to connect to the
AP and thus join the wireless network around it.
– Bridge: EKI-6332GN-AE/EKI-6331AN-BE establishes wireless connectivity
with other APs by keying in remote MAC address. Please refer to the “WDS
Setting” for detailed configuration.
– AP Repeater: EKI-6332GN-AE/EKI-6331AN-BE servers as AP and Bridge
concurrently. In other words, EKI-6332GN-AE/EKI-6331AN-BE can provide
connectivity services for ACCESS POINTs under Bridge mode.
 Wireless Network Name (SSID):
This wireless network name is shared among all associated devices in your