User Manual

EKI-6331AN-BE/EKI-6332GN-AE User Manual 20
3.1 Factory Default Settings
We’ll elaborate EKI-6332GN-AE/EKI-6331AN-BE factory default settings. You can re-
acquire these parameters by default. If necessary, please refer to the “Restore Fac-
tory Default Settings”.
3.2 System Requirements
Before configuration, please make sure your system meets the following require-
ments:
 A computer coupled with 10/ 100 Base-TX adapter;
 Configure the computer with a static IP address of 192.168.1.x, as the default IP
address of EKI-6332GN-AE/EKI-6331AN-BE is 192.168.1.1. (X cannot be 0, 1,
nor 255);
 A Web browser on PC for configuration such as Microsoft Internet Explorer 6.0
or above, Netscape, Firefox or Google Chrome.
Table 3.1: EKI-6332GN-AE/EKI-6331AN-BE Factory Default Settings
Features Factory Default Settings
Username admin
Password password
Wireless Device Name apXXXXXX (X represents the last 6 digits of Ethernet
MAC address)
Operating Mode AP
Data Rate Auto
LAN IP Address 192.168.1.1
Subnet Mask 255.255.255.0
Gateway 0.0.0.0
Primary DNS Server 0.0.0.0
Secondary DNS Server 0.0.0.0
Spanning Tree Enable
Data Rate Auto
Output Power Full
WMM Enabled
RTS Threshold (byte) 2346
Fragmentation Length (byte) 2346
Channel Protection None
Short GI Enable
Distance 1000m
Flow Control by AP Disable
Security Open System
Encryption None