User Manual
Table Of Contents
- EKI-6331AN-BE/ EKI-6332GN-AE
- 1 Introduction
- 2 Hardware Installation
- 3 Basic Settings
- 4 Advanced Settings
- 5 Management
- 6 Monitoring Tools
- 7 Status
- 8 Troubleshooting
- A ASCII
EKI-6331AN-BE/EKI-6332GN-AE User Manual 14
2. Mount the Access Point steadily to the pole by locking the pole mounting ring
tightly.
2.2.5 Power Up
1. Connect power cord to the PoE injector as the following right picture shows.
2. Connect the Ethernet cable that connects the Access Point to the “POE” port of
the PoE injector as figured below.