User Manual
Table Of Contents
- EKI-6331AN-BE/ EKI-6332GN-AE
- 1 Introduction
- 2 Hardware Installation
- 3 Basic Settings
- 4 Advanced Settings
- 5 Management
- 6 Monitoring Tools
- 7 Status
- 8 Troubleshooting
- A ASCII
11 EKI-6331AN-BE/EKI-6332GN-AE User Manual
Chapter 2 Hardware Installation
2. Bend the antennas to 90 degree or 45 degree.
3. You may turn one antenna 45 degrees to the left and the other 45 degrees to the
right. The tilted antennas are a reasonable way to operate and the best way if
the antennas are fairly close together since they couple together much less than
if they are both pointed in the same direction (parallel).
Note! The polarization of antennas should be properly aligned. Maximum sig-
nal strength between bridges occurs when both bridges are using identi-
cal polarization.