User's Manual
Table Of Contents
- _
- Chapter 1. Introduction
- 1.1 Introducing the EKI-6311g
- 1.2 Product Features
- 1.3 Package Contents
- 1.4 System Requirements
- 1.5 Inline Power Injector (PoE)
- Chapter 2. Installation and Basic Configuration
- 2.1 Before You Start
- 2.2 Locate the EKI-6311g and Inline Power Injector Ports
- 2.3 Preparing Installation
- 2.4 Basic Configuration
- 2.4.1 Logging into the Web Interface
- 2.4.2 Basic Configuration Steps
- 2.4.3 Set Operating Mode, IP Address, Subnet Mask, Default Route IP, DNS Server IP of EKI-6311G
- 2.4.4 Set Wireless SSID for Wireless Interface
- 2.4.5 Set Wireless Encryption for Wireless Interface
- 2.4.6 Change Supervisor Account & Password
- 2.4.7 pgrade the Firmware
- Chapter 3. Network Topologies
- Chapter 4. All function on Device
- Chapter 5. Specifications
- Chapter 6. Default Settings
- Chapter 7. Regulatory Compliance Information
45
6 .3 .3 W i- Fi 3
Par am eter De script ion De fault Value
Country
TAI WAN
Radio Status
Disable
Wireless Role
Access Point
Radio Mode
802.11b+ g
Radio Channel
Channel 1, 2412MHz
Peer Node Distance
100 m et ers
SSID
Advant ech/ 3
Transmission Power
17dBm
Frag. Threshold
2346
RTS Threshold
2346
Beacon Interval
100
DTIM Interval
1
Wireless Security
None
VLAN Tagging ID
2
Layer2 Isolation
Disable
Maximum Associated
Stations
32
WMM Status
Disable